Mechanical joysticks with cables, handles and levers, control units.

The joystick control is a mechanical cable-operated two-coordinate type.

Mechanical joysticks or joystick control units are designed for remote control of the hydraulic distributor spool using a special two-way or push-pull remote control cable.

It is used in conjunction with two control cables for the hydraulic distributor, with lengths ranging from 0.5 to 6.5 meters. The cable on the joystick side has a terminal fitting in the form of a fork or ball, depending on the type of joystick. We manufacture joystick control cables for hydraulic distributors in various designs, lengths, and specifications for all types of equipment.

The use of control cables for the hydraulic distributor allows the operator to comfortably control the horizontal, vertical, or rotational movement of the load. When using a joystick, it enables the simultaneous execution of multiple operations.

We offer joysticks with electronic control buttons, ranging from 1 to 3 buttons.

A handle or control lever.

The system is designed for controlling a regulated pump with manual cable control.

It is equipped with a remote control cable for the hydraulic distributor, ranging in length from 0.5 to 6.5 meters. The cable at the joystick side features an end fitting in the form of a fork. We manufacture cables for different lever constructions upon request.

Typically, cables used with levers are of the bidirectional or push-pull type, which transmit force from the operator’s location to the valve spool of the hydraulic distributor section.

The handles can be assembled into control blocks. In the case of portable blocks, remote control cables with rotating fittings are used.